Electrical Connectors

< new and genuine Porsche >< fit various areas in our cars > < for water hoses and wiring looms > < pick from the drop down box > Sizes listed are internal dimensions measured across when the clip is fully closed.

< brand new and genuine PORSCHE < fits the 944s and 944s2 1987 to 1991 > < and the 928 83 to 95 >

< new and will come with a new 3 pin connector >

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

< as it says - male end connector for the reference sensor > < this is the one on the end of the connector and this end plugs into the 3 pin female end thats on the harness >

< Aftermarket FAE reference sensor / speed sensor > < 2 per car on a single cam car > < 1 on a twin cam car - but twin cam cars also use a hall sender that behind the distributor cap > The bosch type is not available at this...

This must be spliced into your original harness. 944online is not responsible for any damage resulting from improper splicing.