Electrical Connectors

If you are rebuilding your factory harness or adding stand alone engine management this boot is a great way to retain the factory look and seal the firewall where the harness enters the vehicle. Fits the following models : 944 1985/2 - 1989 944 Turbo...

as of December 2023 this harnes is no longer available new from Porsche we are in the process of making our own brand and they will be available 1st week of February 2024

< new and genuine Porsche > < this is the connector for the wiring harness that goes to the headlight motor >

< new and genuine Porsche >< fit various areas in our cars > < for water hoses and wiring looms > < pick from the drop down box > Sizes listed are internal dimensions measured across when the clip is fully closed.

< this is the little bracket that hold the reference sensor end in place >

< comes with all you see < 3 x plastic clips and the mounting bolt > < this kits fits all 924S - 944 - AND 944 TURBO/951 >

< no longer avaiable > < brand new and genuine Porsche > < this is the board at the back of the instrument cluster >

< Brand new and genuine Porsche > < 924s and 85/1 944 use 1 of this > < all the other cars - 944 - 951 - 944s and s2 and 968 all use 3> < 928 uses 4 >

plastic connector and the 17 connectors you will need all new and all genuine Porsche fits all our cars 85/2 to 1995 and there are 3 of these per cluster

all you need in 1 kit 2 male and 2 female connector and all the pins