Description
only for the 104 mm bore engine blocks- 944 2.7 - 944 S2 and 968
its 1.4 mm thick and is recomended if you have had the cylinder head machined
this gasket is a genuine Porsche product
GENUINE PORSCHE AND ONLY FOR THE --- 2.7 --- AND -- 3.0 CARS - 944 S 2 AND 968 - 104 MM BORE
THIS IS THE SPECIAL HEAD GASKET THAT'S USED WHEN THE HEAD HAS BEEN MACHINED TO BRING THE CONFIGURATION BACK TO SPECS -IF YOU LOOK IN THE PORSCHE SPEC BOOK IT TELLS YOU THE INFO I HAVE PROVIDED FOR YOU -- THE DISTANCE MEASURED WITH A NEW STANDARD HEAD IS 147 MM +/- 0.1 MM -- IF WHEN THE HEAD HAS BEEN MACHINED IT FALLS BELOW THAT MEASUREMENT THEN THE THICKER [1.4 MM ] MUST BE USED ----- AND ACCORDING TO PORSCHE IF THAT MEASUREMENT FALLS BELOW 146.6 MM THEN THE CYLINDER HEAD IS NOT USABLE- !!!!!! --- AGAIN , THIS CYLINDER HEAD GASKET IS GENUINE PORSCHE AND MEASURES 1.4 MM THICK --- THANK YOU - IAN -
