Victor Reinz

head gasket set for the 87 - 88 944S

Balance shaft seal kit for your 944, 968, or 924 S. The seal collar is no longer included in this kit and will need to be purchased separately if it is needed. You will need sealant to seal the...

Brand new cam housing gasket for your 944. This goes between the cam housing and the cylinder head.

< pick your car from the drop box > 82 to 85/ 1 944 = 30x47x7 85/2 to 91 - 944 2.5 - 944 2.7 all 944 turbo/951 = 32x47x7 all twin cam cars 944s - 944s2 - 968 - 30x47x7

This is the exhaust seal ring that fits on either side of your downpipe. This seals the turbocharger to the downpipe on one side and the down pipe to the catalytic converter on the other side. 2 are...

This is the seal ring that goes between the wastegate elbow to crossover flange.

4 per car < 3 x on the down pipe crossover pipe and 1 x on the waste gate dump pipe >

goes between the pipe from the crossover pipe and the waste gate

only for the 104 mm 2.7 engine block !!