Electrical Connectors

This is the female part of the plug - on the harness side-that the reference sensor plugs into - you will need 2 per car. Please go to the FAQ section for installation instructions. The FAQ for this will be in the electrical category. The FAQ section can...

This is the connector that fits onto the injector- you will need 1 per injector.

Brand new factory cable for your 944. This goes between the starter and alternator on your 944. Fits all the 924s 944 944 turbo and the s2 from 85/2 to 1991 -- Its will fit the 968 also - although its a little longer    

< Brand new factory cable for your 924s - 944 - 951 - s2 968 > > This goes between the battery and starter in your 944<>br>And this from a customer -' and its in great form since the battery harness replacement!! Thanks again Ciaran...

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>

< instrument Lighting kit for 1983 through 1985/1 944.Contains 8 bulbs 2 for each dash instrument and one for the clock and one for the oil pressure gauge > < and all 924 924s - 1976 to 1988 >

Complete reference sensor harness. This will replace the harness from the sensors to the DME clip. This harness does not come with new sensors they must be purchased separately.made for us right here in the USA This repair harness is designed to replace...

< new and genuine porsche > < and sold with a new clamp for the cables >