Engine Block

a set of all 4 wrist pin bushings - genuine Porsche sold as a set of 4 ALSO you will notice that there is NO oil hole drilled into the bushing- you do that AFTER its installed into the connecting rod !!!!!

all 6 bushings in one click -

< This is the sensor for the guage. It is mounted in the engine block.> < this fits all the 944 - 924s - 944s - 944 Turbo/951 -- 944s2 and 968 > < this is the type with 2 wires going to it > and yes its the 115 degree < if you...

< Complete hardware kit to mount the plastic engine tray.> < 3 nuts - 8 washers - 11 bolts >

for model year thru 1986

This is used to properly tension your timing belt when changing your belts.   Belt Tool Instructions  

< VERY important as it directs heat away for the engine mounts > < select left or right >

these VERY important heat shields protect the engine mounts please select left or right

engine running rough when cold ?? this switch sends info to the DME when the engine is cold to allow it to compensate the fuel rate pick the brand you want from the drop down box

all you need to replace the oil cooler seals and take a look at why , after 30 years, you need to do this any wonder why the oil is not cooling as it should

new and genuine Porsche

new and genuine Porsche