Engine Electrical

< This is the sensor for the guage. It is mounted in the engine block.> < this fits all the 944 - 924s - 944s - 944 Turbo/951 -- 944s2 and 968 > < this is the type with 2 wires going to it > and yes its the 115 degree < if you...

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

Here is what is included in this kit 4 - 2 pin fuel injector pigtail kits2 - 2 pin female connector kits3 - 3 pin female connector kits1 - 5 pin female connector kit4 - Heat shrink tubing for pigtailsAll necessary boots and pins are included as well.

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>

Brand new from Porsche. These are ordered direct from Germany. Please allow 3 weeks to ship.

Alternator condensers are seen mainly in older automobiles. Modern car radios are designed largely with a built-in shield against alternator-generated static. When a condenser is used, one of the leads connects to the alternator and one connects to...

Complete reference sensor harness. This will replace the harness from the sensors to the DME clip. This harness does not come with new sensors they must be purchased separately.made for us right here in the USA This repair harness is designed to replace...

3 are needed per car.

3 are needed per car.