Electrical Connectors

Here is what is included in this kit4 - 2 pin fuel injector pigtail kits4 - 2 pin female connector kits3 - 3 pin female connector kits1 - 5 pin female connector kit1 - 7 pin female connector kit4 - Heat shrink tubing for pigtailsAll necessary boots and...

This is used for the ignition control module.

This is the female part of the plug - on the harness side-that the reference sensor plugs into - you will need 2 per car. Please go to the FAQ section for installation instructions. The FAQ for this will be in the electrical category. The FAQ section can...

This is the connector that fits onto the injector- you will need 1 per injector.

This kit includes the 3 reflector bulbs and 17 small twist style bulbs> < Does not include clock bulb!

Brand new factory cable for your 944. This goes between the starter and alternator on your 944. Fits all the 924s 944 944 turbo and the s2 from 85/2 to 1991 -- Its will fit the 968 also - although its a little longer    

< Brand new factory cable for your 924s - 944 - 951 - s2 968 > > This goes between the battery and starter in your 944<>br>And this from a customer -' and its in great form since the battery harness replacement!! Thanks again Ciaran...

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>