Engine Electrical

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>

New and genuine Porsche Alternator condensers are seen mainly in older automobiles. Modern car radios are designed largely with a built-in shield against alternator-generated static. When a condenser is used, one of the leads connects to the alternator...

3 are needed per car.

3 are needed per car.

< new and genuine porsche > < and sold with a new clamp for the cables >

NEW and genuine Porsche

< as it says - male end connector for the reference sensor > < this is the one on the end of the connector and this end plugs into the 3 pin female end thats on the harness >

Aftermarket reference sensor / speed sensor. Fits all year and model 924s / 944 / 968.  

Turn signals not working? Maybe it's the relay

New fuel pump dme relay for your 944, 968, and 924 S. This relay provides power to your fuel pump and engine computer (DME). When this relay is bad your car will crank but not start. This relay is a very common failure point on these models. We highly...