Engine Electrical

For use with factory non-AC cars or cars with the AC delete bracket select year/model from the drop down box

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>

Alternator condensers are seen mainly in older automobiles. Modern car radios are designed largely with a built-in shield against alternator-generated static. When a condenser is used, one of the leads connects to the alternator and one connects to...

Complete reference sensor harness. This will replace the harness from the sensors to the DME clip. This harness does not come with new sensors they must be purchased separately.made for us right here in the USA This repair harness is designed to replace...

3 are needed per car.

3 are needed per car.

12x35 Hex Head Bolt

< new and genuine porsche > < and sold with a new clamp for the cables >