Electrical Connectors

If you are rebuilding your factory harness or adding stand alone engine management this boot is a great way to retain the factory look and seal the firewall where the harness enters the vehicle. Fits the following models : 944 1985/2 - 1989 944 Turbo...

< new and genuine Porsche >< fit various areas in our cars > < for water hoses and wiring looms > < pick from the drop down box > Sizes listed are internal dimensions measured across when the clip is fully closed.

< Brand new and genuine Porsche > < 924s and 85/1 944 use 1 of this > < all the other cars - 944 - 951 - 944s and s2 and 968 all use 3> < 928 uses 4 >

plastic connector and the 17 connectors you will need all new and all genuine Porsche fits all our cars 85/2 to 1995 and there are 3 of these per cluster

as you see it and comes with the following 5x 2 pin female 4x 2 pin female with pigtail 4x 3 pin female 1x 6 pin female

< brand new and genuine Porsche > < you will see that the front left is no longer available - you can use the front left in its place - the only difference is the location of the attachment grommet > < this is the only option that there is...

This is the female part of the plug - on the harness side-that the reference sensor plugs into - you will need 2 per car. Please go to the FAQ section for installation instructions. The FAQ for this will be in the electrical category. The FAQ section can...

This is the connector that fits onto the injector- you will need 1 per injector.

This kit includes the 3 reflector bulbs and 17 small twist style bulbs> < Does not include clock bulb!

Brand new factory cable for your 944. This goes between the starter and alternator on your 944. Fits all the 924s 944 944 turbo and the s2 from 85/2 to 1991 -- Its will fit the 968 also - although its a little longer