Electrical Connectors

< Brand new factory cable for your 924s - 944 - 951 - s2 968 > > This goes between the battery and starter in your 944<>br>And this from a customer -' and its in great form since the battery harness replacement!! Thanks again Ciaran...

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>

< new and genuine porsche > < and sold with a new clamp for the cables >

< as it says - male end connector for the reference sensor > < this is the one on the end of the connector and this end plugs into the 3 pin female end thats on the harness >

Aftermarket reference sensor / speed sensor. Fits all year and model 924s / 944 / 968.  

This must be spliced into your original harness. 944online is not responsible for any damage resulting from improper splicing.