This item fits all the 924 S - 944 - 944 Turbo/951 from 1982 to 1991 Is NOT for the twin cam cars This important rubber seal fits around the air filter housing tube as it fits into the inner fender well to both suppoer the tube and to stop...

this is our own brand and in stock !!

< new and in our own brand silicon > and no longer comes molded !! < 944 Turbo S only > < goes from the fuel pressure regulator to the intake > < yes - this MIGHT be that problem >

This is a complete set of factory mounting hardware for your 944 Turbo air cleaner assembly.

this small clip , located at the back of the air box is VERY important it holds the charge pipe in place if its missing or broken the charge pipe rubs agains the hose clamp for the upper hose and WILL put a hole in it and a hole in the charge pipe...

88 and later 944 turbo only

This will fit the following 944. 944 Turbo 86 - 91 944 S 87  -88 944 S2 89 - 91 with hardware

This cap nut fits the fuel pump check valve and also fit the end of the fuel rail.

This is the female part of the plug - on the harness side-that the reference sensor plugs into - you will need 2 per car. Please go to the FAQ section for installation instructions. The FAQ for this will be in the electrical category. The FAQ section can...

This is the connector that fits onto the injector- you will need 1 per injector.

new and genuine Porsche

4 are needed per car