Engine Block

This is the dowel pin found between the cylinder head and cam tower on your 944.  there are two of these one on either end of the cylinder head and they hold the cam housing in place

This is the dowel pin found between the cylinder head and engine block. there are two of these per block 1 at the rear and 1 by the front cylinder and they hold the cylinder head in place - stop it from moving around

aftermarket pin wrench !!

Engine Rebuild Kit for your 944. Please select your model from the list. This kit includes the following Victor Reinz Head Gasket Set Victor Reinz Lower Engine Gasket Set Glyco rod Bearing Set Standard Genuine PORSCHE Main Bearing Set...

< new and Genuine Porsche > < This is found at the front and rear for your engine block. Please select size below. 2 are needed per block.> < have a question ? ? < ian@944online.com >

there are 7 of this special screw

all you need in one click !! fits all the cars 924s -- 944 -- 944 turbo/951 -- 944S2 and all the 968

select single or twin cam

a set of all 4 wrist pin bushings - genuine Porsche sold as a set of 4 ALSO you will notice that there is NO oil hole drilled into the bushing- you do that AFTER its installed into the connecting rod !!!!!

< all you need in one click -> < and this kit fits all 944 - 944 turbo/951 - 944s - 944s2 - 968 from 1987 to 1995 >

Brand new and Genuine Porsche. Comes as you see it with a new roller. Single Cam Fits The Following : 924 S 1987-1988 944 1987 - 1989 944 Turbo - 1987 - 1991 Twin Cam Fits The Following : 944 S 1987 - 1988 944 S2 1989 - 1991

< pick your car from the drop box > 82 to 85/ 1 944 = 30x47x7 85/2 to 91 - 944 2.5 - 944 2.7 all 944 turbo/951 = 32x47x7 all twin cam cars 944s - 944s2 - 968 - 30x47x7