Engine Electrical

for use with factory non-ac cars or cars with the AC delete bracket select your type from the drop down box

factory type the 944/1 and the 924s use a special spacer the 85/2 and later cars do not - please select from the drop down box

This must be spliced into your original harness. 944online is not responsible for any damage resulting from improper splicing.

Engine running rough when cold ? This switch sends info to the DME when the engine is cold to allow it to compensate the fuel rate pick the brand you want from the drop down box. We include the needed seal ring.

Sold with the gasket. You will need either a 29mm deep socket or wrench to remove this sensor. and pick the temp range you want from the drop down box

Brand new distributor cap gasket for your 944. This is found in the front cam cover behind the distributor cap. 

Brand new and Genuine Porsche Reference Sensor Bracket Kit. This will fit all 8v single cam cars. On early model 944 it may be necessary to cut the extra sensor hole off of the side of the bracket for it to fit correctly.