Engine Cylinder Head Parts

This fits the 944 S2

New piston ring set for 2.7 and 3.0 engines. This is for a standard 104.0mm bore. This is for a complete set for all 4 pistons. This will fit the following: 1989 2.7 944 1989 - 1991 944 S2 1992 - 1995 968

exhaust gasket,exhaust gaskets,exhaust manifold

fits 944 S -- 944 S2 AND 968 ONLY -7 per intake

< 2 are needed per chain tensioner.> < 6 x 16 mm > < thank you Charles Heery >

Brand new stainless steel valve cover bolt.3 are needed per valve cover. All 944 Valve Covers use 10 long bolts and 3 short bolts All 968 Valve Covers use 9 Long Bolts and 4 Short Bolts

Brand new stainless steel valve cover bolt.10 are needed per car. All 944 Valve Covers use 10 long bolts and 3 short bolts All 968 Valve Covers use 9 Long Bolts and 4 Short Bolts

This valve is no longer available from Porsche we have , after some research , come up with new seals for this valve replacement of these is a MUST when rebuilding the cylinder head < this is the valve at the back of the cylinder head for all the...

for the twim cam cars only

< new and will come with a new 3 pin connector >

2 are needed per hollow screw

2 x per head and don't forget the washers