Engine Cylinder Head Parts

< This is only for the twin cam cars > < 944s - 944s2 - 968 - and the 4 cam 928 > < and its for the exhaust manifold to cylinder head >

< 2 are needed per chain tensioner.> < 6 x 16 mm > < thank you Charles Heery >

Brand new stainless steel valve cover bolt.3 are needed per valve cover. All 944 Valve Covers use 10 long bolts and 3 short bolts All 968 Valve Covers use 9 Long Bolts and 4 Short Bolts

Brand new stainless steel valve cover bolt.10 are needed per car. All 944 Valve Covers use 10 long bolts and 3 short bolts All 968 Valve Covers use 9 Long Bolts and 4 Short Bolts

This valve is no longer available from Porsche we have , after some research , come up with new seals for this valve replacement of these is a MUST when rebuilding the cylinder head < this is the valve at the back of the cylinder head for all the...

for the twim cam cars only

< new and will come with a new 3 pin connector >

2 are needed per hollow screw

2 x per head and don't forget the washers

24 are needed per head

< This will fit all 944 S, 944 S2 and 968.> 1 x needed

new Genuine Porsche