Electrical Connectors

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

< new and genuine Porsche > < Used to hold the wiring harness in place in the engine compartment>

Complete reference sensor harness. This will replace the harness from the sensors to the DME clip. This harness does not come with new sensors they must be purchased separately.made for us right here in the USA This repair harness is designed to replace...

< new and genuine porsche > < and sold with a new clamp for the cables >

< as it says - male end connector for the reference sensor > < this is the one on the end of the connector and this end plugs into the 3 pin female end thats on the harness >

Aftermarket reference sensor / speed sensor. Fits all year and model 924s / 944 / 968.  

The Porsche 944 uses a set of single drop brackets to secure the front sway bar. During cornering these brackets flex, and by doing so they reduce the effect of the 944 front sway bar.Our braces bolt between the stock brackets and the cross member to...

This must be spliced into your original harness. 944online is not responsible for any damage resulting from improper splicing.