Engine Cylinder Head Parts

Kit contains the following1 Timing Belt Roller,1 Timing Belt Tensioner Roller,1 Balance Belt Roller and 1 Balance Belt Tensioner Roller .This kit will fit 1987 and later cars only. It will NOT fit the S or S2 models Pick the brand you want from...

for 1987 engines with automatic tensioner select the brand you want from the drop down box

< 4 required > < metal side facing out > < fits all single cam cars - turbo included >

8 required

This set contains four manifold gaskets,eight exhaust studs and eight copper exhaust nuts.

< this is the little cam housing seal as shown in this picture > < fits all the single cam cars 82 to 91 > < 924s - 944 - 951 > >

Brand new cam belt inspection hole plug for your 944. please select engine type the round type is for the single cam cars and the square type is for all the twin cam cars

This head gasket is made thicker for cylinder heads that have been reconditioned. This is only necessary if the mating surface on your head has fallen below factory spec.To see what the factory specs are on the head go to the tech SECTION OF THE FORUM --...

Bleeder and seal for the water neck.

 Fits into the water neck at the back of the head.  Pick the one you need form the drop down box. The seal ring is included.

Porsche now have the old type standard cheaper gasket available again !! -- and here it is -- thanks -

t here are 2 types of water outlets please check the one on your 944 and select the correct one from the drop down box above. with or without the hole for the thermo valve