Tools

oil cooler alignment tool - this type is for the 87 + engines - < the type with the treaded neck fits ALL the cars - 944 - 944s - 944 Turbo/951 -944s2 - 968 from 1987 to 1995 >

Easy way to test your oil cooler for leaks. Just pressurize to 30 psi and submerge in a bucket of water. If you see bubbles in the water then it is time for a replacement.

Used to hold adjuster in place while tightening the nut.

Needed to correctly align the oil cooler housing to the engine block.for all engines through 1986 -old style 3 piece valve - or - the new one piece updated type - < the early type without the threaded neck fits all 944 - 82 to 86 including the 86 944...

50ML Squeeze Bottle

Protect your nuts with our soft socket

This is used to properly tension your timing belt when changing your belts.   Belt Tool Instructions  

< new and your choice > < aftermarket or genuine Porsche > < both are steel >

This is the 12 point tool needed to remove 12 point bolts while working on your 944. They are available in the following sizes. 8mm - CV Bolt10mm - Cam Bolt12mm - Flywheel BoltPlease select the size you need when ordering.

This is a eccentric adjuster used to align the rear axle toe on your 944

< This is the original tool kit that came with the 924S - 944 - 944 TURBO/ 951 -- 944S -- 944S2 - and the 968 > < new and genuine Porsche >   Contents: - Double open-ended wrenches 8x9, 10x11, 12x13, 14x15, 17x19 - Wheel nut...

A MUST WHEN REPLACING THE CLUTCH !!