for model year thru 1986

No longer available,call for price on used pans.

This is used for the sensor side of the reference sensor connector.

This is used for the harness side of the reference sensor connector.

Here is what is included in this kit 4 - 2 pin fuel injector pigtail kits2 - 2 pin female connector kits3 - 3 pin female connector kits1 - 5 pin female connector kit4 - Heat shrink tubing for pigtailsAll necessary boots and pins are included as well.

This is used for the Air Flow Meter in all 944.

Used for Fuel InjectorsDme Temp Sensor85/2 idle control valve Knock Sensor(Turbo and 16v models only)Hall Sender (16v Models Only)

Easy way to test your oil cooler for leaks. Just pressurize to 30 psi and submerge in a bucket of water. If you see bubbles in the water then it is time for a replacement.

Used to hold adjuster in place while tightening the nut.

Needed to correctly align the oil cooler housing to the engine block.for all engines through 1986 -old style 3 piece valve - or - the new one piece updated type - < the early type without the threaded neck fits all 944 - 82 to 86 including the 86 944...

50ML Squeeze Bottle

Protect your nuts with our soft socket