Engine Block

select single or twin cam

a set of all 4 wrist pin bushings - genuine Porsche sold as a set of 4 ALSO you will notice that there is NO oil hole drilled into the bushing- you do that AFTER its installed into the connecting rod !!!!!

< all you need in one click -> < and this kit fits all 944 - 944 turbo/951 - 944s - 944s2 - 968 from 1987 to 1995 >

all 6 bushings in one click -

Brand new and Genuine Porsche. Comes as you see it with a new roller. Single Cam Fits The Following : 924 S 1987-1988 944 1987 - 1989 944 Turbo - 1987 - 1991 Twin Cam Fits The Following : 944 S 1987 - 1988 944 S2 1989 - 1991

< pick your car from the drop box > 82 to 85/ 1 944 = 30x47x7 85/2 to 91 - 944 2.5 - 944 2.7 all 944 turbo/951 = 32x47x7 all twin cam cars 944s - 944s2 - 968 - 30x47x7

only for the 104 mm 2.7 engine block !!

4 are needed per car this is for a 2.7 only select brand and we have the aftermarket type in stock < the aftermarket ones are made for us by Ferrea valves - very very good quality >

4 are needed per car this is for a 2.7 only select brand from the drop down box and I have the aftermarket type in stock < the aftermarket ones we carry are made specially for us by Ferrea racing valves locally in Ft Lauderdale - very good quality...

Kit contains the following1 Timing Belt Roller,1 Timing Belt Tensioner Roller,1 Balance Belt Roller and 1 Balance Belt Tensioner Roller .This kit will fit 1987 and later cars only. It will NOT fit the S or S2 models Pick the brand you want from...

< This is the sensor for the guage. It is mounted in the engine block.> < this fits all the 944 - 924s - 944s - 944 Turbo/951 -- 944s2 and 968 > < this is the type with 2 wires going to it > and yes its the 115 degree < if you...

< Complete hardware kit to mount the plastic engine tray.> < 3 nuts - 8 washers - 11 bolts >