Engine Block

New set of wrist pin bushings for your 944 924s and 968. New wrist pin bushings do not come pre drilled with the oil hole. You will need to drill the hole after it is installed.    Fits the following :  1982 1991 944 1986 - 1988 924S 1992...

< all you need in one click -> < and this kit fits all 944 - 944 turbo/951 - 944s - 944s2 - 968 from 1987 to 1995 >

all 6 bushings in one click -

Brand new and Genuine Porsche. Comes as you see it with a new roller. Single Cam Fits The Following : 924 S 1987-1988 944 1987 - 1989 944 Turbo - 1987 - 1991 Twin Cam Fits The Following : 944 S 1987 - 1988 944 S2 1989 - 1991

brand new and genuine Porsche

brand new and genuine porsche

new and genuine Porsche Includes new o-rings. these can be difficult to remove from an engine block because of age if the is ANY damage at all to the area where the seals fit you MUST replace this

brand new and genuine porsche

< pick your car from the drop box > 82 to 85/ 1 944 = 30x47x7 85/2 to 91 - 944 2.5 - 944 2.7 all 944 turbo/951 = 32x47x7 all twin cam cars 944s - 944s2 - 968 - 30x47x7

< VERY important as it directs heat away for the engine mounts > < select left or right >

Kit contains the following1 Timing Belt Roller,1 Timing Belt Tensioner Roller,1 Balance Belt Roller and 1 Balance Belt Tensioner Roller .This kit will fit 1987 and later cars only. It will NOT fit the S or S2 models Pick the brand you want from...

< This is the sensor for the guage. It is mounted in the engine block.> < this fits all the 944 - 924s - 944s - 944 Turbo/951 -- 944s2 and 968 > < this is the type with 2 wires going to it > and yes its the 115 degree < if you...